GESTRA Control Valves
ADCATrol two-way, three-way and self-acting temperature control valves — engineered for precise flow control in industrial steam and process applications.
Products › Valves › Control Valves › GESTRA
Product Range
Steam Globe Control Valves
V16/2(EN)
GESTRA
The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V16/2 Series
V16/2 (ASME)
GESTRA
The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V16/2 (ASME)
V16/2 (Threaded)
GESTRA
The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V16/2 (Threaded)
V25/2 (EN)
GESTRA
The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V25/2 (EN)
V25/2 (ASME)
GESTRA
The ADCATrol V25/2 is a series of single seated, two-way globe valves designed for process engineering and industrial applications, where events such as erosion, cavitation or flashing may occur. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
V25/2 (ASME)
PV15 (EN)
GESTRA
The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
PV15 (EN)
PV15 (ASME)
GESTRA
The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
PV15 (ASME)
EV15 (EN)
GESTRA
The ADCATrol EV15 is a series of single seated, two-way electric on/off globe valves with electric actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
EV15 (EN)
EV15 (ASME)
GESTRA
The ADCATrol EV15 is a series of single seated, two-way electric on/off globe valves with electric actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
EV15 (ASME)
VKF42
GESTRA
Single seated, two-way valve with in-line straight connections and pneumatic actuator (DA or RA action). Wide application range including water, steam, air, gas and non-corrosive fluids.
VKF42
Motorized Globe Valves
MPA46
GESTRA
The ADCATrol MPA46 is a series of single seated, three-way globe control valves designed to ensure accurate control in mixing and diverting process engineering and industrial applications. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks.
MPA46
MPA52
GESTRA
The ADCATrol MPA52 is a series of three-way globe control valves designed to ensure accurate control in mixing or diverting general service applications. These valves can be assembled with pneumatic, hydraulic or electric actuators and used with the most common process fluids such as water, superheated water, thermal oil, steam, air, gas and other non corrosive fluids.
MPA52
VKF423
GESTRA
The VKF423 control valves are three-way valve body for mixing service. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The V403 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, diathermic oil, steam, air, gas and other non corrosive fluids.
VKF423 | DN 15 - 50
Enquire About GESTRA Control Valves
Our engineers help you select the correct valve type, size, actuator and trim for your specific process conditions and pressure class.
