Pressure Regulating Equipment-ADCA
PRV25
The ADCA PRV25 is a series of direct acting pressure reducing valves designed for use on steam, compressed air, water and other gases and liquids. These regulators are suitable for reducing steam pressure at the point of use on laundry machines, dyeing, food industries, sterilizers, etc.
MATERIAL
Carbon steel or stainless steel
SIZES
1/2” to 1” – DN 15 to 25
CONNECTIONS
Threaded ISO 7 Rp
Flanged EN PN 25
Flanged ASME Class 150 or 300
MAX. UPSTREAM PRESSURE
Up to 17 bar
MAX. DESIGN TEMPERATURE
Up to 210 ºC
REGULATING RANGE
0,35 to 8,6 bar
FLOW RATE COEFFICIENTS
1,7 to 3,1 Kvs
RP45B
The ADCA RP45 series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These valves are particularly suitable for reducing steam pressure in all energy and process systems where pressures must be kept under control.
MATERIAL
SG Iron, carbon steel or stainless steel
SIZES
DN 50 to DN 100
CONNECTIONS
Flanged EN 1092-1 PN 16 or PN 40
MAX. UPSTREAM PRESSURE
Up to 40 bar
MAX. OPERATING TEMPERATURE
130 ºC
REGULATING RANGE
0,2 to 18 bar
FLOW RATE COEFFICIENTS
26,5 to 129,5 Kvs (m3/h)
PRV57
The ADCA PRV57 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV57 can be installed in pressure reducing stations throughout all industries, and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.
MATERIAL
Carbon steel or stainless steel
SIZES
DN 15 to DN 100
CONNECTIONS
Flanged EN 1092-1 PN 16 or PN 40
MAX. UPSTREAM PRESSURE
28 bar
MAX. OPERATING TEMPERATURE
250 ºC
REGULATING RANGE
0,07 to 17 bar
P20D
The ADCA P20D series direct-acting, spring-loaded diaphragm sensing, balanced plug pressure reducing valves are designed for use on compressed air, water and other gases or liquids compatible with the materials of construction. They are suitable for pressure reducing stations where small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators.
MATERIAL
Stainless steel
SIZES
1/4” to 1/2”
CONNECTIONS
Threaded ISO 7 Rp or NPT
MAX. UPSTREAM PRESSURE
50 bar
MAX. DESIGN TEMPERATURE
80 ºC *
REGULATING RANGE
0,2 to 15 bar
FLOW RATE COEFFICIENTS
1,2 to 1,8 Kvs
More Products- Email with model name for quote.
The ADCA PRV47 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV47 can be installed in pressure reducing stations throughout all industries and provides sensitive and accurate control even when inlet pressure fluctuations or flow variations occur.
The ADCA P7 series direct-acting, spring-loaded diaphragm sensing pressure reducing valves, are designed for use with steam, compressed air and other gases compatible with the materials of construction. They are suitable for pressure reducing stations where very small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators.
The ADCA P20DS series direct-acting, spring-loaded diaphragm sensing pressure reducing valves, are designed for use on steam, compressed air, and other gases or liquids compatible with the materials of construction. They are suitable for pressure reducing stations where small loads are involved. They are also specifically recommended to operate as pilot valves in combination with other pressure regulators.
The ADCA P20P series pressure reducing valves are direct acting, spring loaded, piston sensing balanced plug regulators designed for use with nitrogen, compressed air, water and other gases and liquids compatible with the materials of construction. Suitable for general purpose pressure reducing applications such as instrumentation systems and industrial equipment where small loads and high pressures are involved.
The ADCA PRV41 series direct-acting, spring-loaded piston sensing, balanced plug pressure reducing valves, are designed for use on compressed air, water and other gases or liquids compatible with the materials of the construction. They are suitable for pressure reducing stations at the point of use on different industrial applications.