ADCAMAT PUMP AND PUMP TRAPS
POP | DN 25 - 80
The ADCAMat POP pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.
MATERIAL
Carbon steel or stainless steel
SIZES
1'' x 1'' a 3" x 2"
DN 25 x 25 a DN 80 x 50CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
185 ºC
FLOW RATE CAPACITY
Up to 6080 kg/h
POP | DN 100
The ADCAMat POP pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel.
MATERIAL
Carbon steel
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
185 ºC
FLOW RATE CAPACITY
Up to 29800 kg/h
POPS-K (Simplex)
A POPS-K packaged unit is comprised by an ADCAMat pump, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection. Packaged units save time, work and site costs. In addition, they ensure that the installation of the pump is correct in every detail.
POPS-KD (Duplex)
A POPS-KD (Duplex) packaged unit is comprised by two ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection
POPS-KT (Triplex)
A POPS-KT (Triplex) packaged unit is comprised by three ADCAMat pumps in parallel, a vented receiver and all auxiliary items, compactly mounted on a metal frame, piped and ready for connection.
APST
The ADCAMat APST automatic pump trap is especially recommended where stall condition may occur due to poor steam trap condensate discharge capacity, caused by temporary insufficient pressure drop.
The equipment combines the features of a float steam trap and a pressure operated pump, in one single unit.
MATERIAL
Carbon steel and stainless steel
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
185 ºC
POP-LC
The ADCAMat POP-LC low capacity pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure.The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.
MATERIAL
Carbon steel and stainless steel
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
185 ºC
FLOW RATE CAPACITY
Up to 2195 kg/h
PPA-312
The ADCAMat PPA312 pressure operated pump is recommended in the transfer of steam condensate, oils and other non-hazardous liquids compatible with the construction, to a higher elevation or pressure. Under certain conditions, it can drain a closed vessel under vacuum or pressure. The pump can be operated using steam, compressed air or other gases, and is manufactured in carbon steel or stainless steel.
MATERIAL
Carbon steel
CONNECTIONS
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
Female threaded ISO 7 Rp
MAX. MOTIVE PRESSURE
10 bar
MAX. OPERATING TEMPERATURE
185 ºC
FLOW RATE CAPACITY
Up to 7540 kg/h