You are here:
  1. Home
  2. Valsteam ADCA
  3. Control Valves

ADCA CONTROL VALVES

ADCA PV25_adca_control_valve

PV 25

The PV25 On-Off ADCA Control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator comprises a rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). use in fluids such as water, superheated water, steam, air, gas and other non corrosive fluids.
DATSSHEET
Assembly Drg
Adca_control_valve_pv15

PV15

The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
Datasheet
ADCA CONTROL VALVES

PPV15

The ADCATrol PPV15 is a series of single seated, two-way pneumatic on/off globe valves with piston actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils.
Datasheet
pav21 angle valve

PAV21

Adca Control valve: The PAV series angle seat interception valves are designed for use with steam, gases and other fluids used in the process industry. They are an efficient solution to fluid interception in applications where flexibility and affordable cost are required.
DATSSHEET
Adca_control_valve_pv40

PV40

The PV40 ADCA control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The PV40 valves have been designed to ensure accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, steam, air, gas and other non-corrosive fluids.
Datasheet
PV403_ADCA

PV403 | DN 15 - 50

The PV403 ADCA control valves are three-way valve body for mixing service. The PA pneumatic actuator is rubber diaphragm and multi-springs. Its action can be DA – direct action (air to close) or RA – reverse action (air to open). The V403 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allow the use of this valve with the most common process fluids such as water, superheated water, diathermic oil, steam, air, gas and other non corrosive fluids.
Datasheet

Can't find what you are looking for? visit ADCA wesbite

Email Us