Ball Float & thermostatic Steam Traps-UNA 14H & UNA 45 H
Steam traps-GESTRA with ball float for removing condensate from steam, cold condensate without banking-up eg; GESTRA UNA14 H
The traps comes with the tried and tested rolling ball seal work with exceptionally low friction and therefore have very low actuating forces. They are durable and guarantee maximum tightness.
The trap comes with automatic air venting system for automatic venting of non condensable gases and dissolved gases and strainer is also inbuilt.
We will give you 3 years of unconditional guarantee on the steam traps and if you are not satisfied with the product, your money will be returned.
This steam trap is suitable for virtually all requirements.
- Steam-regulated heat exchangers
- Systems with a high condensate flow-rate
- Steam manifolds
- Steam driers, gas driers, cyclone separators
- Systems with very small operating pressures, very low differential pressure and extremely variable operating conditions
- Vacuum systems
- Gas and compressed air lines
- Drying cylinders
- Reliable function regardless of back pressure and condensate temperature
- No loss of steam thanks to the formation of a water seal
- Maximum tightness and durability as well as excellent control characteristics, as the sealing unit of the regulator has a rolling or segmented ball
- Immediate response level control without automatic venting – Simplex version
- With automatic, fast-acting venting for steam systems – Duplex version
- Especially insensitive to dirt
- Inner parts made of corrosion-resistant stainless steel
- Fully operational even when back pressure is nearly 100% of upstream pressure
- Can be serviced without removing the body
Thermostatic Steam Traps BK
Effective condensate removal or air venting
the opening and closing process is controlled by the interaction of bimetallic plates and a stage nozzle. BK series steam traps highly responsive, very efficient and extremely resistant.
- Saturated steam pipes
- Superheated steam pipes
- Trace heaters
- Air heaters
- Extremely good start-up performance
- No loss of steam
- Suitable for differential pressure up to 275 bar
- Able to cope with the harshest operating conditions
- Any installation position – in horizontal or vertical pipes
- Inner parts made of corrosion-resistant stainless steel
- Can be serviced without removing the body from the pipe
- Metal base bushing provides the seal between the body and bimetallic regulator
- Stage nozzle for non-return valve action
- Wear-resistant
